To solve this problem, we must first know the reasons why a machine may crash. The term "freeze" is sometimes used to indicate that the system is "frozen".
If the solutions below are not sufficient, a search on Google with the keywords "Windows Freeze", "computer locked" or "locking system" or a combination of the three will give you some clues.
Remember also to refine the query with the brand and model of the device that you suspect to be the cause (motherboard, graphics card, etc.)..
If the solutions below are not sufficient, a search on Google with the keywords "Windows Freeze", "computer locked" or "locking system" or a combination of the three will give you some clues.
Remember also to refine the query with the brand and model of the device that you suspect to be the cause (motherboard, graphics card, etc.)..
What makes my PC freezes?
bad memory :
Most of the time, blocking problems are due to defective RAM chips. Memory cards NoName (unbranded) have particularly small defects that can prevent the proper functioning of the PC.
Should be tested memory with Memtest86:
Memtest results are easy to analyze:
If your start screen retains the same table after at least one complete pass, we can estimate that the memory is in working condition. If lines are added, your memory is faulty.
Should be tested memory with Memtest86:
Memtest results are easy to analyze:
If your start screen retains the same table after at least one complete pass, we can estimate that the memory is in working condition. If lines are added, your memory is faulty.
hardware conflict :
You must restart the PC with a minimum of devices. Disconnect CD players, recorders, Internet connection (modem), printers, hard drives, complementary, etc..
Retry until reboot the PC more. When it reboots more, reconnect the devices one by one until you meet the problem again.
Retry until reboot the PC more. When it reboots more, reconnect the devices one by one until you meet the problem again.
Overheating the processor or graphics card :
Check the temperature of CPU and / or graphics card, and if it is too high, install a more powerful fan.
To know the temperature of the processor or the video card, just use a utility included with some motherboards, or Aïda 32 (free on Telecharger.com).
It is also possible to lower the temperature by lowering the CPU voltage in BIOS. Attention! This operation is reserved for experts! It may cause system instability, which would be the opposite of the desired effect.
To know the temperature of the processor or the video card, just use a utility included with some motherboards, or Aïda 32 (free on Telecharger.com).
It is also possible to lower the temperature by lowering the CPU voltage in BIOS. Attention! This operation is reserved for experts! It may cause system instability, which would be the opposite of the desired effect.
faulty power supply :
This cause is uncontrollable without specific electrical equipment. The solution is to change the diet to a more powerful, while hoping that it will solve the problem or get tested by a professional.
The blockage can also be caused by micro EDF cuts. It is possible to test your power supply by EDF using a device provided for this purpose. If indeed you are experiencing brownouts, EDF will be necessary, but in the opposite case, it is useful to know that the movement will be at your expense.
Buying a UPS will solve this problem!
The blockage can also be caused by micro EDF cuts. It is possible to test your power supply by EDF using a device provided for this purpose. If indeed you are experiencing brownouts, EDF will be necessary, but in the opposite case, it is useful to know that the movement will be at your expense.
Buying a UPS will solve this problem!
software conflict :
It is necessary to remember when was the problem and what are the software or drivers that were installed before the beginning of trouble. Then remove the software or update the driver responsible.
Defective equipmentPlace the computer in full force review: motherboard, processor, video card, sound card, etc ...A repairer may also do the job and test the machine by changing these components one by one.
BIOS settings:
Make sure that the memory frequency is correct and that the latency is the factory configuration.Voltages are also of paramount importance. Thus, a sub-voltée RAM is often unstable and cause freezes. Check the specifications of your RAM on manufacturer websites and put the recommended value (if you do not know, put between 1.9 v and 2.2 v for the value Vram if it is DDR2, at least 2.2 if v c is the DDR1). The processor voltage is sometimes also cause a voltage too low can cause instability. Ask you once again on the website builder, in general, this value should be between 1.2 v and 1.4 v.A BIOS update is also possible by visiting the website of the manufacturer of your motherboard. Thinking to make a backup of the current BIOS diskette. Do not do this on a stormy day because a power failure during BIOS update would be fatal to it!Tools update for Asus and Abit:Asus:http://www.station-drivers.com/page/asusupdate.htmAbit:For Abit http://www.clubic.com/d/drivers/800.html
Viruses :Apart from the problems caused by the computer itself and its components, is obviously the action of viruses graft. It is even one of the leading causes of blockages computer. In this case, there are several viruses and derivatives capable of causing such trouble with the famous Sasser and Blaster.You will find links to all CCM various corrective patches and perform manipulation to disable restore your system in order to better eliminate them.
Tip for Windows :To stop unwanted reboots, sometimes just a simple operation, but it is not effective in all cases:1) Go to the Start menu, then Control Panel, then Performance and maintenance and finally System (or by right-clicking on "My Computer" and selecting properties)2) Click the "Advanced" tab3) Click Settings in Startup and Recovery4) Uncheck "Automatically restart"







0 comments:
Post a Comment